Evolutions in Microstructure and Properties of Cu-Ni-Si-Mg-Mn Multi-Element High-Solute Alloy During a Short-Time Solid Solution Treatment, Aging, and Cold-Rolling.
Saved in:
| Title: | Evolutions in Microstructure and Properties of Cu-Ni-Si-Mg-Mn Multi-Element High-Solute Alloy During a Short-Time Solid Solution Treatment, Aging, and Cold-Rolling. |
|---|---|
| Authors: | Zhang, Yuhang1,2 (AUTHOR), Feng, Xiaolong2,3 (AUTHOR), Zhang, Qingke2,3 (AUTHOR) zhangqingke@nimte.ac.cn, Lu, Xiang2,4 (AUTHOR), Xu, Cheng1,2 (AUTHOR), Zhang, Xinli2,3 (AUTHOR), Liu, Feng3,4 (AUTHOR), Song, Zhenlun2,4 (AUTHOR) |
| Source: | Materials (1996-1944). Apr2026, Vol. 19 Issue 8, p1485. 15p. |
| Subjects: | Cold rolling, Microstructure, Nickel-manganese alloys, Heat treatment, Phase transitions, Precipitation hardening, Copper alloys, Mechanical behavior of materials |
| Abstract: | Highlights: A multi-element CuNiSiMgMn high-solute alloy was designed to get ultrahigh strength. Recrystallization and precipitate decomposition behaviors at 1000 °C are revealed. A strip with a tensile strength of >950 MPa and a conductivity of >30% IACS was obtained. To obtain ultrahigh strength Cu alloy strip for board-to-board connectors, a CuNiSiMgMn multi-element high-solute alloy was designed, and high-temperature short-time solid solution was utilized to optimize the properties of this alloy. The evolution in microstructure and properties of the cold-rolled CuNiSiMgMn alloy strip during high-temperature short-time solid solution, aging, and further cold-rolling are investigated. The results reveal that there are high-density NixSi precipitates and deformation defects in the original cold-rolled CuNiSiMgMn alloy strip. During a solid solution at 1000 °C, recrystallization primarily occurs between 15 and 30 s, while precipitate decomposition starts at a solid solution time of ~30 s and is almost complete 10 s later. With further increase in the solid solution time, the grain size of the alloy grows rapidly, but the residual precipitate particles exhibit little change. Upon aging at 500 °C for 2 h and a further 80% cold-rolling, nano-sized precipitates are formed, yielding high-strength alloy strips. The 80% cold-rolling increases the microhardness by 12% and decreases the electrical conductivity by 3% IACS. The strip solid solution-treated for 35 s exhibits the maximum strength, with a tensile strength of >950 MPa and a conductivity of >30% IACS. Further extension of the solid solution time decreases both the tensile strength and elongation. This work clarifies the critical time of recovery, recrystallization, and precipitate decomposition of the CuNiSiMgMn alloy during high-temperature solid solution and provides guidance for industrial production. [ABSTRACT FROM AUTHOR] |
| Copyright of Materials (1996-1944) is the property of MDPI and its content may not be copied or emailed to multiple sites without the copyright holder's express written permission. Additionally, content may not be used with any artificial intelligence tools or machine learning technologies. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.) | |
| Database: | Engineering Source |
|
Full text is not displayed to guests.
Login for full access.
|
|
| Abstract: | Highlights: A multi-element CuNiSiMgMn high-solute alloy was designed to get ultrahigh strength. Recrystallization and precipitate decomposition behaviors at 1000 °C are revealed. A strip with a tensile strength of >950 MPa and a conductivity of >30% IACS was obtained. To obtain ultrahigh strength Cu alloy strip for board-to-board connectors, a CuNiSiMgMn multi-element high-solute alloy was designed, and high-temperature short-time solid solution was utilized to optimize the properties of this alloy. The evolution in microstructure and properties of the cold-rolled CuNiSiMgMn alloy strip during high-temperature short-time solid solution, aging, and further cold-rolling are investigated. The results reveal that there are high-density NixSi precipitates and deformation defects in the original cold-rolled CuNiSiMgMn alloy strip. During a solid solution at 1000 °C, recrystallization primarily occurs between 15 and 30 s, while precipitate decomposition starts at a solid solution time of ~30 s and is almost complete 10 s later. With further increase in the solid solution time, the grain size of the alloy grows rapidly, but the residual precipitate particles exhibit little change. Upon aging at 500 °C for 2 h and a further 80% cold-rolling, nano-sized precipitates are formed, yielding high-strength alloy strips. The 80% cold-rolling increases the microhardness by 12% and decreases the electrical conductivity by 3% IACS. The strip solid solution-treated for 35 s exhibits the maximum strength, with a tensile strength of >950 MPa and a conductivity of >30% IACS. Further extension of the solid solution time decreases both the tensile strength and elongation. This work clarifies the critical time of recovery, recrystallization, and precipitate decomposition of the CuNiSiMgMn alloy during high-temperature solid solution and provides guidance for industrial production. [ABSTRACT FROM AUTHOR] |
|---|---|
| ISSN: | 19961944 |
| DOI: | 10.3390/ma19081485 |
