Post-Processing Optimization of MDLP-Fabricated 316L Stainless Steel: Microstructural Evolution and Mechanical Properties.
Saved in:
| Title: | Post-Processing Optimization of MDLP-Fabricated 316L Stainless Steel: Microstructural Evolution and Mechanical Properties. |
|---|---|
| Authors: | Wu, Zequn1 (AUTHOR), Liu, Weiwei1,2 (AUTHOR), Zhou, Hongzhi1,2 (AUTHOR), Zhang, Xing1,2 (AUTHOR), Chen, Yao1 (AUTHOR), Zhang, Qinghao1 (AUTHOR), Xu, Wenjie1 (AUTHOR), Li, Wenli1 (AUTHOR), Xing, Zhanwen1 (AUTHOR) |
| Source: | Materials (1996-1944). May2026, Vol. 19 Issue 9, p1769. 13p. |
| Subjects: | Sintering, Microstructure, Austenitic stainless steel, Heat treatment, Mechanical behavior of materials |
| Abstract: | Metal Digital light processing (MDLP) offers high resolution and excellent surface quality, but the final properties of printed parts are highly dependent on post-processing. In this study, the effects of debinding, decarburization, and sintering on the shape fidelity, microstructure, and mechanical properties of MDLP-fabricated 316L stainless steel were systematically investigated. The optimal post-processing route consisted of debinding in an inert atmosphere, decarburization in air within 400–600 °C, and sintering at 1370 °C for 4 h under flowing nitrogen. Under these conditions, the sintered parts achieved a relative density of 98.03 ± 0.23%, hardness of 380.63 ± 9.15 HV, elastic modulus of 213.47 ± 5.5 GPa, tensile strength of 519.7 ± 22 MPa, and elongation at fracture of 76.8 ± 9.3%. Microstructural analysis showed that increasing the sintering temperature reduced porosity and smoothed the morphology of Cr-rich oxygen-containing second phase regions, thereby alleviating stress concentration and improving mechanical properties. This study provides an effective post-processing strategy for MDLP-fabricated 316L stainless steel and examines the microstructural origins of the observed property evolution. [ABSTRACT FROM AUTHOR] |
| Copyright of Materials (1996-1944) is the property of MDPI and its content may not be copied or emailed to multiple sites without the copyright holder's express written permission. Additionally, content may not be used with any artificial intelligence tools or machine learning technologies. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.) | |
| Database: | Engineering Source |
|
Full text is not displayed to guests.
Login for full access.
|
|
| Abstract: | Metal Digital light processing (MDLP) offers high resolution and excellent surface quality, but the final properties of printed parts are highly dependent on post-processing. In this study, the effects of debinding, decarburization, and sintering on the shape fidelity, microstructure, and mechanical properties of MDLP-fabricated 316L stainless steel were systematically investigated. The optimal post-processing route consisted of debinding in an inert atmosphere, decarburization in air within 400–600 °C, and sintering at 1370 °C for 4 h under flowing nitrogen. Under these conditions, the sintered parts achieved a relative density of 98.03 ± 0.23%, hardness of 380.63 ± 9.15 HV, elastic modulus of 213.47 ± 5.5 GPa, tensile strength of 519.7 ± 22 MPa, and elongation at fracture of 76.8 ± 9.3%. Microstructural analysis showed that increasing the sintering temperature reduced porosity and smoothed the morphology of Cr-rich oxygen-containing second phase regions, thereby alleviating stress concentration and improving mechanical properties. This study provides an effective post-processing strategy for MDLP-fabricated 316L stainless steel and examines the microstructural origins of the observed property evolution. [ABSTRACT FROM AUTHOR] |
|---|---|
| ISSN: | 19961944 |
| DOI: | 10.3390/ma19091769 |
