Simultaneous faults diagnosis and prognostic in induction motor drives under nonstationary conditions.

Saved in:

Bibliographic Details
Title:	Simultaneous faults diagnosis and prognostic in induction motor drives under nonstationary conditions.
Authors:	Aimer, Ameur Fethi^1,2 fethi.aimer@yahoo.fr, Boudinar, Ahmed Hamida^2,3 boud_ah@yahoo.fr, Khodja, Mohamed El-Amine^2,3 koudjamea@gmail.com, Bendiabdellah, Azeddine^2,3 bendiazz@yahoo.fr
Source:	Telkomnika. Apr2026, Vol. 24 Issue 2, p717-726. 10p.
Subjects:	Fault diagnosis, Autoregressive models, Signal processing, Induction motors, Transient analysis
Abstract:	In this paper, an auto regressive (AR) model-based approach is applied in the stator current analysis under non-stationary conditions (case of frequency variation due to variable speed operation). Under these conditions, the identification of fault signatures is almost impossible due the variation of the fundamental frequency using conventional analysis methods. Moreover, this approach is used in the diagnosis of multiple faults occurring simultaneously in induction motor drives. In this aim, the stator current signal is decomposed into short segments then the AR modeling approach is applied on each segment. This approach called short-time ROOT-AR is then applied to solve the problem of the non-stationarity of the stator current signal under variable speed operation. The efficiency of the short-time ROOT-AR approach is evaluated through experimental tests in the diagnosis of multiple faults occurring simultaneously in induction motor drive. Finally, the superiority of the proposed approach is highlighted in comparison with conventional techniques in terms of accuracy, computational time and robustness against the noise. [ABSTRACT FROM AUTHOR]
	Copyright of Telkomnika is the property of Department of Electrical Engineering, Ahmad Dahlan University and its content may not be copied or emailed to multiple sites without the copyright holder's express written permission. Additionally, content may not be used with any artificial intelligence tools or machine learning technologies. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)
Database:	Engineering Source

Description
Abstract:	In this paper, an auto regressive (AR) model-based approach is applied in the stator current analysis under non-stationary conditions (case of frequency variation due to variable speed operation). Under these conditions, the identification of fault signatures is almost impossible due the variation of the fundamental frequency using conventional analysis methods. Moreover, this approach is used in the diagnosis of multiple faults occurring simultaneously in induction motor drives. In this aim, the stator current signal is decomposed into short segments then the AR modeling approach is applied on each segment. This approach called short-time ROOT-AR is then applied to solve the problem of the non-stationarity of the stator current signal under variable speed operation. The efficiency of the short-time ROOT-AR approach is evaluated through experimental tests in the diagnosis of multiple faults occurring simultaneously in induction motor drive. Finally, the superiority of the proposed approach is highlighted in comparison with conventional techniques in terms of accuracy, computational time and robustness against the noise. [ABSTRACT FROM AUTHOR]
ISSN:	16936930
DOI:	10.12928/TELKOMNIKA.v24i2.27624