Bibliographic Details
| Title: |
Warm deep drawing of wrought magnesium alloy sheets produced by semi-solid roll strip-casting process |
| Authors: |
Watari, H.1 watari@oyama-ct.ac.jp, Koga, N.2, Davey, K.3, Haga, T.4, Alonso Ragado, M.T.3 |
| Source: |
International Journal of Machine Tools & Manufacture. Sep2006, Vol. 46 Issue 11, p1233-1237. 5p. |
| Subjects: |
Magnesium alloys, Metallic composites, Chemical molding, Alloys |
| Abstract: |
Abstract: This paper is concerned with the development of a continuous strip-casting technology to facilitate the manufacture of magnesium sheet alloys economically whilst maintaining high quality. Established in the paper is warm formability of cast magnesium alloy sheets after being hot rolled by semi-solid roll strip-casting process. It has been found that magnesium sheet with 2.0–4.0mm thickness could be produced at a speed of 25m/min. Hot rolling and annealing temperatures during hot rolling were also changed to examine which condition would be appropriate for producing wrought magnesium alloys with good formability. Microstructures of the crystals of the manufactured wrought magnesium alloys were observed. It has been found that a limiting drawing ratio of 2.7 was possible in a warm deep-drawing test of the cast magnesium alloy sheets after being hot rolled. [Copyright &y& Elsevier] |
|
Copyright of International Journal of Machine Tools & Manufacture is the property of Pergamon Press - An Imprint of Elsevier Science and its content may not be copied or emailed to multiple sites without the copyright holder's express written permission. Additionally, content may not be used with any artificial intelligence tools or machine learning technologies. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.) |
| Database: |
Engineering Source |
