View in EDS

Warm deep drawing of wrought magnesium alloy sheets produced by semi-solid roll strip-casting process

Saved in:
Bibliographic Details
Title: Warm deep drawing of wrought magnesium alloy sheets produced by semi-solid roll strip-casting process
Authors: Watari, H.1 watari@oyama-ct.ac.jp, Koga, N.2, Davey, K.3, Haga, T.4, Alonso Ragado, M.T.3
Source: International Journal of Machine Tools & Manufacture. Sep2006, Vol. 46 Issue 11, p1233-1237. 5p.
Subjects: Magnesium alloys, Metallic composites, Chemical molding, Alloys
Abstract: Abstract: This paper is concerned with the development of a continuous strip-casting technology to facilitate the manufacture of magnesium sheet alloys economically whilst maintaining high quality. Established in the paper is warm formability of cast magnesium alloy sheets after being hot rolled by semi-solid roll strip-casting process. It has been found that magnesium sheet with 2.0–4.0mm thickness could be produced at a speed of 25m/min. Hot rolling and annealing temperatures during hot rolling were also changed to examine which condition would be appropriate for producing wrought magnesium alloys with good formability. Microstructures of the crystals of the manufactured wrought magnesium alloys were observed. It has been found that a limiting drawing ratio of 2.7 was possible in a warm deep-drawing test of the cast magnesium alloy sheets after being hot rolled. [Copyright &y& Elsevier]
Copyright of International Journal of Machine Tools & Manufacture is the property of Pergamon Press - An Imprint of Elsevier Science and its content may not be copied or emailed to multiple sites without the copyright holder's express written permission. Additionally, content may not be used with any artificial intelligence tools or machine learning technologies. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)
Database: Engineering Source
FullText Text:
  Availability: 0
Header DbId: egs
DbLabel: Engineering Source
An: 21739825
AccessLevel: 6
PubType: Academic Journal
PubTypeId: academicJournal
PreciseRelevancyScore: 0
IllustrationInfo
Items – Name: Title
  Label: Title
  Group: Ti
  Data: Warm deep drawing of wrought magnesium alloy sheets produced by semi-solid roll strip-casting process
– Name: Author
  Label: Authors
  Group: Au
  Data: <searchLink fieldCode="AR" term="%22Watari%2C+H%2E%22">Watari, H.</searchLink><relatesTo>1</relatesTo><i> watari@oyama-ct.ac.jp</i><br /><searchLink fieldCode="AR" term="%22Koga%2C+N%2E%22">Koga, N.</searchLink><relatesTo>2</relatesTo><br /><searchLink fieldCode="AR" term="%22Davey%2C+K%2E%22">Davey, K.</searchLink><relatesTo>3</relatesTo><br /><searchLink fieldCode="AR" term="%22Haga%2C+T%2E%22">Haga, T.</searchLink><relatesTo>4</relatesTo><br /><searchLink fieldCode="AR" term="%22Alonso+Ragado%2C+M%2ET%2E%22">Alonso Ragado, M.T.</searchLink><relatesTo>3</relatesTo>
– Name: TitleSource
  Label: Source
  Group: Src
  Data: <searchLink fieldCode="JN" term="%22International+Journal+of+Machine+Tools+%26+Manufacture%22">International Journal of Machine Tools & Manufacture</searchLink>. Sep2006, Vol. 46 Issue 11, p1233-1237. 5p.
– Name: Subject
  Label: Subjects
  Group: Su
  Data: <searchLink fieldCode="DE" term="%22Magnesium+alloys%22">Magnesium alloys</searchLink><br /><searchLink fieldCode="DE" term="%22Metallic+composites%22">Metallic composites</searchLink><br /><searchLink fieldCode="DE" term="%22Chemical+molding%22">Chemical molding</searchLink><br /><searchLink fieldCode="DE" term="%22Alloys%22">Alloys</searchLink>
– Name: Abstract
  Label: Abstract
  Group: Ab
  Data: Abstract: This paper is concerned with the development of a continuous strip-casting technology to facilitate the manufacture of magnesium sheet alloys economically whilst maintaining high quality. Established in the paper is warm formability of cast magnesium alloy sheets after being hot rolled by semi-solid roll strip-casting process. It has been found that magnesium sheet with 2.0–4.0mm thickness could be produced at a speed of 25m/min. Hot rolling and annealing temperatures during hot rolling were also changed to examine which condition would be appropriate for producing wrought magnesium alloys with good formability. Microstructures of the crystals of the manufactured wrought magnesium alloys were observed. It has been found that a limiting drawing ratio of 2.7 was possible in a warm deep-drawing test of the cast magnesium alloy sheets after being hot rolled. [Copyright &y& Elsevier]
– Name: AbstractSuppliedCopyright
  Label:
  Group: Ab
  Data: <i>Copyright of International Journal of Machine Tools & Manufacture is the property of Pergamon Press - An Imprint of Elsevier Science and its content may not be copied or emailed to multiple sites without the copyright holder's express written permission. Additionally, content may not be used with any artificial intelligence tools or machine learning technologies. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract.</i> (Copyright applies to all Abstracts.)
PLink https://search.ebscohost.com/login.aspx?direct=true&site=eds-live&db=egs&AN=21739825
RecordInfo BibRecord:
  BibEntity:
    Identifiers:
      – Type: doi
        Value: 10.1016/j.ijmachtools.2006.01.018
    Languages:
      – Code: eng
        Text: English
    PhysicalDescription:
      Pagination:
        PageCount: 5
        StartPage: 1233
    Subjects:
      – SubjectFull: Magnesium alloys
        Type: general
      – SubjectFull: Metallic composites
        Type: general
      – SubjectFull: Chemical molding
        Type: general
      – SubjectFull: Alloys
        Type: general
    Titles:
      – TitleFull: Warm deep drawing of wrought magnesium alloy sheets produced by semi-solid roll strip-casting process
        Type: main
  BibRelationships:
    HasContributorRelationships:
      – PersonEntity:
          Name:
            NameFull: Watari, H.
      – PersonEntity:
          Name:
            NameFull: Koga, N.
      – PersonEntity:
          Name:
            NameFull: Davey, K.
      – PersonEntity:
          Name:
            NameFull: Haga, T.
      – PersonEntity:
          Name:
            NameFull: Alonso Ragado, M.T.
    IsPartOfRelationships:
      – BibEntity:
          Dates:
            – D: 01
              M: 09
              Text: Sep2006
              Type: published
              Y: 2006
          Identifiers:
            – Type: issn-print
              Value: 08906955
          Numbering:
            – Type: volume
              Value: 46
            – Type: issue
              Value: 11
          Titles:
            – TitleFull: International Journal of Machine Tools & Manufacture
              Type: main
ResultId 1