View in EDS

Switched Oscillators and Their Integration Into Helical Antennas.

Saved in:
Bibliographic Details
Title: Switched Oscillators and Their Integration Into Helical Antennas.
Authors: Giri, D. V.1,2 Giri@DVGiri.com, Tesche, Frederick M.3,4, Abdalla, Michael D.5,6, Skipper, Michael C.5,6, Nyffeler, Markus7
Source: IEEE Transactions on Plasma Science. Jun2010, Vol. 38 Issue 6, p1411-1426. 16p.
Subjects: Electric oscillators, Electric lines testing, Antennas (Electronics), Electric fields, Radio frequency discharges
Abstract: In this paper, the problem of designing switched oscillators at four different frequencies (200, 300, 400, and 500 MHz) has been addressed. These oscillators are quarter-wavelength long coaxial transmission lines with a nitrogen spark gap switch at one end. Two of these switched oscillators at 200 and 500 MHz with a charge voltage of 30 kV have also been fabricated. These two oscillators are modeled using PSpice and their output into a 100 Ω load is estimated and tested by fabricating a 100 Ω transmission line. Use is made of a modified commercial helical antenna with a bandwidth of 400-600 MHz and a switched oscillator has been integrated into this helical antenna. Measurements have been made of the S11, the voltage into the antenna, and also the transient fields at two distances. Indeed, starting from electrical power from a 12 V battery, electrical field strengths in excess of 10 kV/m with damped sinusoidal waveforms at 500 MHz (for example) have been demonstrated. [ABSTRACT FROM AUTHOR]
Copyright of IEEE Transactions on Plasma Science is the property of IEEE and its content may not be copied or emailed to multiple sites without the copyright holder's express written permission. Additionally, content may not be used with any artificial intelligence tools or machine learning technologies. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)
Database: Engineering Source
Description
Abstract:In this paper, the problem of designing switched oscillators at four different frequencies (200, 300, 400, and 500 MHz) has been addressed. These oscillators are quarter-wavelength long coaxial transmission lines with a nitrogen spark gap switch at one end. Two of these switched oscillators at 200 and 500 MHz with a charge voltage of 30 kV have also been fabricated. These two oscillators are modeled using PSpice and their output into a 100 Ω load is estimated and tested by fabricating a 100 Ω transmission line. Use is made of a modified commercial helical antenna with a bandwidth of 400-600 MHz and a switched oscillator has been integrated into this helical antenna. Measurements have been made of the S11, the voltage into the antenna, and also the transient fields at two distances. Indeed, starting from electrical power from a 12 V battery, electrical field strengths in excess of 10 kV/m with damped sinusoidal waveforms at 500 MHz (for example) have been demonstrated. [ABSTRACT FROM AUTHOR]
ISSN:00933813
DOI:10.1109/TPS.2010.2047657