Bibliographic Details
| Title: |
Measurements for the Dissociation Conditions of Methane Hydrate in the Presence of 1,3,5-Trioxane and Oxolan-2-ylmethanol. |
| Authors: |
Wei-Yi Ko1, Li-Jen Chen1, Shiang-Tai Lin1, Yan-Ping Chen1 |
| Source: |
Journal of Chemical & Engineering Data. Aug2011, Vol. 56 Issue 8, p3406-3410. 5p. |
| Subjects: |
Dissociation (Chemistry), Methane hydrates, Solution (Chemistry), Phase equilibrium, High pressure (Science), Low temperatures |
| Abstract: |
The dissociation conditions for methane hydrates in the presence of (0.0104 to 0.0350) mole fraction ((0.05 to 0.15) mass fraction) 1,3,5-trioxane aqueous or brine solutions and (0.0192 to 0.0702) mole fraction ((0.10 to 0.30) mass fraction) oxolan-2-ylmethanol (tetrahydrofurfuryl alcohol, THFA) aqueous solutions were experimentally measured in this study. The hydrate phase dissociation conditions were measured with an apparatus which was operated at high pressure and low temperature conditions. The liquid water–hydrate–vapor (Lw-H-V) three-phase equilibrium dissociation temperatures and pressures for methane hydrate in the presence of these additives were determined by employing the isochoric method. New experimental data are reported within the pressure range from (4 to 10) MPa for the methane + water + 1,3,5-trioxane hydrate system and from (9 to 15) MPa for the methane + water + oxolan-2-ylmethanol hydrate system, respectively. It is demonstrated that the addition of 1,3,5-trioxane has a promotion effect on the formation of methane hydrate. In addition, the liquid–hydrate–vapor (L-H-V) three-phase equilibrium dissociation conditions for brine solution with water and 0.011 mole fraction (0.035 mass fraction) NaCl were also measured in this study with the addition of 1,3,5-trioxane. The promotion effect for methane hydrate formation in brine environments is also observed. On the other hand, the results of adding oxolan-2-ylmethanol show the inhibition effect on the formation of methane hydrate. [ABSTRACT FROM AUTHOR] |
|
Copyright of Journal of Chemical & Engineering Data is the property of American Chemical Society and its content may not be copied or emailed to multiple sites without the copyright holder's express written permission. Additionally, content may not be used with any artificial intelligence tools or machine learning technologies. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.) |
| Database: |
Engineering Source |