Bibliographic Details
| Title: |
Sand Transportations and Deposition Characteristics in Multiphase Flows in Pipelines. |
| Authors: |
Al-lababidi, S.1 s.allababidi@cranfield.ac.uk, Yan, W.2, Yeung, H.2 |
| Source: |
Journal of Energy Resources Technology. Sep2012, Vol. 134 Issue 3, p034501-1-034501-13. 13p. |
| Subjects: |
Air-water interfaces, Sand, Pipelines, Slurry, Flow assurance (Petroleum engineering) |
| Abstract: |
Sand management strategies become an important study to be performed as part of multiphase flow assurance assessments during oil and gas project life and especially for subsea multiphase flow network. This paper presents experimental works to investigate the sand transport characteristics and identify the sand minimum transport condition (MTC) ill sand--water and sand--air--water flows in a horizontal and + 5 deg inclined pipelines. The used sand volume fraction, Cv, ranged from 1.61 x 10-5 up to 5.38 x 10-4. The sand minimum transport velocity in single-phase water flow was obtained visually and then compared with that calculated by previous correlations for slurry transport. It was found that in sand-water flow, the pipeline inclination had negligible effect on the minimum sand transport velocity. However, the transport characteristics of sand particles were found changed significantly by changing the pipe inclination, which could result in the change of air--water flow regime. It was observed that sand particles transport more efficiently in terrain slug than stratified wavy flow in +5 deg inclined pipes. The sand transport and settling boundary for different air--water flow regimes were generated for horizontal and +5 deg inclined pipeline. [ABSTRACT FROM AUTHOR] |
|
Copyright of Journal of Energy Resources Technology is the property of American Society of Mechanical Engineers and its content may not be copied or emailed to multiple sites without the copyright holder's express written permission. Additionally, content may not be used with any artificial intelligence tools or machine learning technologies. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.) |
| Database: |
Engineering Source |