View in EDS

Microstructural study of microwave sintered zirconia for dental applications.

Saved in:
Bibliographic Details
Title: Microstructural study of microwave sintered zirconia for dental applications.
Authors: Monaco, C.1, Prete, F.2, Leonelli, C.3, Esposito, L.1, Tucci, A.1 tucciantonella@gmail.it
Source: Ceramics International. Jan2015:Part B, Vol. 41 Issue 1, p1255-1261. 7p.
Subjects: Zirconium oxide, Sintering, Hot working, Iron metallurgy, Microstructure, Microphysics
Abstract: Conventional sintering techniques for zirconia-based materials, which are commonly used in dental reconstruction, may not provide uniform heating, with the consequent generation of microstructural flaws in the final component. A sintering system using microwave heating may represent a viable alternative. The purpose of this study was to compare the dimensional variation and physical and microstructural characteristics of commercial zirconia (Y-TZP), used as a dental restoration material, sintered in conventional and microwave furnaces. A physical-mineralogical-microstructural characterisation was carried out to evaluate the level of densification and the presence of flaws in the sintered specimens. Use of the microwave systems allowed the length of the sintering cycle to be reduced to a few minutes, compared with the several hours necessary with a ‘traditional’ heating system. Additionally, the maximum temperature used to reach the required density decreased from 1450–1480 °C with the electric furnace to 1200 °C in the microwave furnace. An important clinical implication is that the reduced sintering time could allow the introduction of zirconia in chair-side treatments, if used as a monolithic material. [ABSTRACT FROM AUTHOR]
Copyright of Ceramics International is the property of Elsevier B.V. and its content may not be copied or emailed to multiple sites without the copyright holder's express written permission. Additionally, content may not be used with any artificial intelligence tools or machine learning technologies. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)
Database: Engineering Source
Description
Abstract:Conventional sintering techniques for zirconia-based materials, which are commonly used in dental reconstruction, may not provide uniform heating, with the consequent generation of microstructural flaws in the final component. A sintering system using microwave heating may represent a viable alternative. The purpose of this study was to compare the dimensional variation and physical and microstructural characteristics of commercial zirconia (Y-TZP), used as a dental restoration material, sintered in conventional and microwave furnaces. A physical-mineralogical-microstructural characterisation was carried out to evaluate the level of densification and the presence of flaws in the sintered specimens. Use of the microwave systems allowed the length of the sintering cycle to be reduced to a few minutes, compared with the several hours necessary with a ‘traditional’ heating system. Additionally, the maximum temperature used to reach the required density decreased from 1450–1480 °C with the electric furnace to 1200 °C in the microwave furnace. An important clinical implication is that the reduced sintering time could allow the introduction of zirconia in chair-side treatments, if used as a monolithic material. [ABSTRACT FROM AUTHOR]
ISSN:02728842
DOI:10.1016/j.ceramint.2014.09.055