Bibliographic Details
| Title: |
3D Printed SnSe Thermoelectric Generators with High Figure of Merit. |
| Authors: |
Burton, Matthew R.1 (AUTHOR) m.r.burton@swansea.ac.uk, Mehraban, Shahin2 (AUTHOR), Beynon, David1 (AUTHOR), McGettrick, James1 (AUTHOR), Watson, Trystan1 (AUTHOR), Lavery, Nicholas P.2 (AUTHOR), Carnie, Matthew J.1 (AUTHOR) m.j.carnie@swansea.ac.uk |
| Source: |
Advanced Energy Materials. Jul2019, Vol. 9 Issue 26, pN.PAG-N.PAG. 1p. |
| Subject Terms: |
*Thermoelectric generators, *Tin selenide, *Print materials, *Bulk solids, *Thermoelectric materials, *Printmaking, *Three-dimensional printing, *Printing ink |
| Abstract: |
Since the discovery of the record figure of merit (ZT) of 2.6 ± 0.3 in tin selenide (SnSe), the material has attracted much attention in the field of thermoelectrics. This paper reports a novel pseudo‐3D printing technique to fabricate bulk SnSe thermoelectric elements, allowing for the fabrication of standard configuration thermoelectric generators. In contrast to fabrication examples presented to date, this technique is potentially very low‐cost and allows for facile, scalable, and rapid fabrication. Bulk SnSe thermoelectric elements are produced and characterized over a wide range of temperatures. An element printed from an ink with 4% organic binder produces the highest performance, with a ZT value of 1.7 (±0.25) at 758 K. This is the highest ZT reported of any printed thermoelectric material, and the first bulk printed material to operate at this temperature. Finally, a proof‐of‐concept, all printed SnSe thermoelectric generator is presented, producing 20 µW at 772 K. [ABSTRACT FROM AUTHOR] |
| Database: |
Energy & Power Source |
