| Authors: |
Zhang Y; College of Mechanical and Electrical Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing, 210016, China; Institute of Addictive Manufacturing (3D Printing), Nanjing University of Aeronautics and Astronautics, Nanjing, 210016, China., Raza Naqvi SM; College of Mechanical and Electrical Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing, 210016, China; Institute of Addictive Manufacturing (3D Printing), Nanjing University of Aeronautics and Astronautics, Nanjing, 210016, China., Sun L; School of Mechanical Engineering, Southeast University, Nanjing, 210096, China., Gu J; College of Mechanical and Electrical Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing, 210016, China; Institute of Addictive Manufacturing (3D Printing), Nanjing University of Aeronautics and Astronautics, Nanjing, 210016, China., Nasir MA; Department of Mechanical Engineering, University of Engineering and Technology, 10 Pakistan, Taxila, 47070, Pakistan., Jiao C; Department of Mechanical and Aerospace Engineering, Hong Kong University of Science and Technology, 999077, Hong Kong, China. Electronic address: mechenj@ust.hk., Shen L; College of Mechanical and Electrical Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing, 210016, China; Institute of Addictive Manufacturing (3D Printing), Nanjing University of Aeronautics and Astronautics, Nanjing, 210016, China. Electronic address: ldshen@nuaa.edu.cn. |
